Starting experience of IMALENT MS08 enter the battlefield, and be invincible. Take off the shirt, but also the true colors, Yushu Linfeng.
Wearing armor to enter the border places to be invincible and out of the shirt is still true to the wind
Wear armor, enter the battlefield, and be invincible. Take off the shirt, but also the true colors, Yushu Linfeng.
—-Starting experience of IMALENT MS08
Armor: The protective clothing of ancient warriors. Helmet, head protection; armor, body protection. Mostly made of metal, but also made of rattan or leather. The armor in this article also refers to the shell of the IMALENT MS08 flashlight that can be flexibly disassembled. The function of this shell is to ensure the comfort of use. Since two cooling fans are arranged on the casing, after the fans are turned on, the temperature of the flashlight can be lowered to ensure its good performance, and the user’s palm will not be uncomfortable due to the rapid temperature rise.
We all know that the warriors who wear armor appear tall and burly. The MS08 is no exception. Putting on the shell makes it look much bigger. Once you don’t need to work, you don’t need to go to the battlefield, take off the shell, MS08 is also a little monster in the palm of your hand, and the overall appearance is not big. Compared with other similar products, it is a bit delicate. Therefore, the IMALENT MS08 flashlight can be used as a metaphor, that is: wear armor, enter the battlefield, and be invincible. Take off the shirt, but also the true colors, Yushu Linfeng.
Let’s take a look at what it looks like. Figure 3 shows how the casing is removed.
IMALENT MS08 is a multi-output button-type multi-function LED flashlight powered by three 4000mAh21700 high-rate discharge rechargeable lithium batteries. Range of 738 meters. The barrel is made of aerospace-grade aluminum alloy material, CNC machined shell, military three-level hard anodized treatment, double-sided coating scratch-resistant optical lens, 6 brightness levels, button-type dimming, easy to operate, Satisfy the lighting of users in various occasions. The most important thing is that MS08 is equipped with a heat-dissipating heat-insulating double-fan enclosure, which can turn on the fan to reduce the temperature of the flashlight so that the user can obtain the maximum comfort and enhance the best performance for further long-term use.
MS08 head diameter: 74mm, barrel diameter: 51mm, length: 125.5mm, weight: 656g (without casing, including battery). MS08 uses magnetic charging, can size, precise and compact design, coupled with intelligent temperature control, power monitoring, low-voltage warning reminder, low-power protection and many other intelligent designs, MS08 is more suitable for enthusiasts, it is an outdoor adventure, One of the essential tools for camping, emergency and rescue.
The packaging of IMALENT MS08 is a gift box. The whole is mainly black, the shell is a push-pull cover, and the front is the main picture of MS08.
The overall design is fashionable, atmospheric, and tasteful, and it is really thoughtful. The details are also thoughtful. The lining of the box is all made of foam plastic, which is simple and environmentally friendly and full of taste. There is an accessory bag on the side, and the box is opened and closed with magnets. The overall configuration is one Emmental IMALENT MS08 flashlight, built-in original 21700, 3 4000mAh lithium batteries (in the flashlight), two USB magnetic charging cables, sealing rubber ring, manual and flashlight cover.
The workmanship of this flashlight cover is really good, the size is suitable and the workmanship is fine. The side of the flashlight cover has the Emmental LOGO, and the back is designed with hanging holes and canvas Velcro for hanging and other wearing methods.
illustrate in detail
When MS08 was first received, there was an English word please remove it before use on the lens, reminding the user to remove the plastic film before using it for the first time. Protect the lens, and give a thumbs up for your attentiveness.
The picture below is the tail of the MS08 flashlight shell, we can see the fan switch and the fan magnetic charging device, and below the switch is the fan usage and charging indicator. The fan’s battery is at the bottom of the case and can last up to 105 minutes.
The rear of the casing adopts a three-legged design, which protects the fan switch from being turned on by mistake, in addition to the perfect inversion.
When the fan is charging and discharging, the tail indicator will intuitively remind the user of the power status, which is very user-friendly design.
The shell is designed with a fixing bolt under the side switch, which can ensure the firm connection between the shell and the flashlight body. The disassembly is very simple, and it can be disassembled and installed with bare hands.
This is the comparison picture after dismantling the shell. It can be seen that the MS08 has a well-proportioned and perfect body after the armor is removed, which can be called Yushu Linfeng.
Let’s talk about the shell first. The shell adopts a large-area hollow design, which can dissipate heat well with the function of the fan. In addition to ensuring that the palm does not feel uncomfortable when holding it, it will also greatly improve the performance of the mobile phone. The circular part in the middle of the picture below is the fan of the MS08, one on each side of the symmetry, running very smoothly and with little sound.
The general information of this flashlight is on the plane of the tail cover of the flashlight body after the shell is removed. Through the figure below, you can clearly see the laser printed logo, product name, model, battery used and maximum luminous flux on the tail plane.
Turning on the flashlight, you can see that the merchant has carefully placed a transparent insulating sheet on the head of the battery. This insulating sheet can better protect the flashlight circuit from being connected to the positive and negative electrodes during transportation. Take it out when you use it, or when you take it apart for the first time. This is the first business I have seen that also put a LOGO on the insulating sheet. Even the details are invested in, give a like.
The white cut surface of the middle cylinder is the conductive contact surface of the end surface. The conductive end surface is generally designed with a slightly longer thread, mainly to cope with daily wear and tear. If the flashlight with conductive end face is afraid of being lit by mistake, turn the tail cover of the flashlight half a turn counterclockwise, and the flashlight cannot be lit. However, when using a flashlight with conductive ends, the thread must be tightened.
MS08 uses three 4000mAh21700 high-rate discharge rechargeable lithium batteries with protective plates. In order to ensure safety and normal warranty, please use the original rechargeable lithium battery with protective plate configured by Emmy Nect in the battery compartment.
Independent battery compartment, safe and reliable. The inner wall of the battery compartment is smooth, the space is just right without being crowded, and the workmanship is free of burrs.
The three battery compartments are connected in parallel and independent, and one battery can be lit independently, but for the safety of the flashlight and battery, it is not recommended to try. The head of the tail spring is recessed inward, and this design will not hurt the tail of the battery.
The positive contact surface, the edge of the contact surface has been chamfered, and there is no sharp feeling when touched by hand.
The white round hole in the picture below is the positioning hole of the MS08 housing. Above the positioning hole is a metal side button, which can control all gear adjustments with one hand. The side buttons are relatively large, feel good, and operate lightly, crisply, and have a click sound. The length of the flashlight is 125.5mm, and the button is just in the thumb holding position, which is ergonomic and does not feel uncomfortable when operating.
The white concave transparent dots in the picture below are the power indicator lights, one on each side of the symmetry, which can remind you of the power level in real time. If it flashes at a frequency of 2HZ, please charge it in time. Two symmetrical indicator lights, no need to turn the flashlight in use, there is always one indicator light that can be seen.
The two copper contact points seen in the picture below are the magnetic charging part, which can be charged by connecting the configured magnetic charging cable to the power supply. No matter it is a standard 220V home power supply, a car charger, a power bank, or a computer USB, it can be charged without turning on any switches, just plug it in and charge it, and it can be charged as you use it. The flashlight cannot be turned on while charging. The only thing that feels awkward is the anti-scalding logo. It would be perfect if it could be aligned vertically with the charging device.
Using 8 CREE XHP70 second-generation light sources, the lifespan is 50,000 hours, and the maximum brightness output is 34,000 lumens. The details are well handled, the lamp bead is centered, and there is no skew or even crooked.
Official data: Product size: 74mm (head diameter) x 51mm (body diameter) X 125.5mm (total length) Product net weight: 656g (including battery) (without casing) After a simple test, the data obtained are similar to the official data .
temperature rise test
The picture below is a simple test of the heat dissipation performance of this IMALENT MS08 flashlight entering 34,000 lumens using a high-temperature fast electronic thermometer. The indoor ambient temperature during the test is 20.6 degrees Celsius, no wind, static, and the test time is 10 minutes. Since the test is affected by the room temperature, the location of the test environment and the level of the tester, there may be errors in the data. The following chart data is for reference only. At the same room temperature and at the same position, I tested the case temperature with and without the fan. In the spreadsheet, I used red numbers to represent the data that exceeds the body temperature, which is more intuitive.
Illumination and endurance test
Regarding the illuminance, due to the differences in the level of each measurer, the accuracy of the equipment used, and the differences in time and location, there may be discrepancies with the official data. All the data in the following pictures are for production reference only. The illuminance meter is GM1020 high-precision digital illuminance meter, the vertical distance is 1 meter from the IMALENT MS08 flashlight, and the data is 1 data every 6 seconds. During the test, the configured 4000mAh 21700 battery is used, and the gear is 34000 lumens extremely bright. Similarly, there are two situations in which the fan cannot be separated from the one with the fan turned on. The first is the case where the fan is not turned on.
The picture below shows the operation of the fan.
very bright night shot
MS08 uses 8 CREE XHP70 second-generation light sources, aluminum orange-faced reflectors, double-sided coated anti-scratch light lenses, and a shell with a basic constant temperature under dual fans. It is very comfortable to shoot outdoors at night. Don’t worry about being out of control. The picture below shows the situation of 34000 outdoor night shots.
On the whole, MS08 is in line with the standard of an enthusiast in terms of workmanship and the brightness pursued by players, especially the detachable casing and cooling fan make the 08 more handy. In addition, many intelligent designs such as intelligent temperature control, power monitoring, low-voltage warning reminder, and low-power protection have indeed attracted the favor of some hardcore players. If you want to use it for outdoor search, adventure, emergency, etc., it is undoubtedly correct to choose MS08.
1. It is recommended that the anti-scalding logo can be aligned with the charging interface part, so that patients with obsessive-compulsive disorder will not be entangled.
2. It is recommended that the battery capacity of the fan be slightly larger, which is perfect to match the running time of the flashlight.
Imalent MS12 Mini LED Flashlight review – Blindingly bright light you can hold in your hand REVIEW – Have you ever noticed how some companies seem to excel making certain products—even if the general public has never herd of them? Case in point: Imalent. Ima-who? Exactly. Imalent makes flashlights—really bright flashlights. In the flashlight world (is there one?), Imalent...
The monster that tears the night–IMALENT MS06 Little Fatty Start Experience “The brand IMALENT is a very distinctive brand. From the earliest DD4R and T4A that used flashlights for user-friendly displays, to the M series with tens of thousands of lumens on the shelves recently. Some gaps in the flashlight circle have been eliminated. Now...